Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Slap on TruVativ's RockGuard and pin it through the rough. It's made from tough polycarbonate to take freeride and downhill abuse, and it's 4 bolt, 104 BCD compatible.
Race Face aluminum Torx chainring nut/bolt set for triple chainrings. Includes four nut/bolt sets.
TruVativ's Stylo All Mountain Guard is all-mountain chainring protection with style. This 4mm thick aluminum guide is 4 bolt, 104 BCD compatible.
Race Face direct-mount chainring spider for Cinch ranksets.
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
Race Face Crank Boots • Fits from Race Face: Turbine Cinch, Turbine, Atlas, Evolve, and Ride Cranks • Fits from SRAM: X1 (Alloy), X9, X7, X5, S1400, S1000, S800 Cranks • Fits from Shimano: XT, SLX, Deore Cranks
- Aluminum Hollowtech-II (HT8) crank-arm to BB-spindle Mounting Bolt - Bolt: only one needed for non-drive side
- 8 bikes worth of adapters for Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. - 65 piece kit includes 4 each Shimano and SRAM adapter sets, plus extra spacers for…
Pioneer's Shimano Ultegra 6800 Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. The Ultegra 6800 left crank arm meter truly brings power to the people, and gives every rider power-based (also called watt-based) training performance, allowing you to fine-tune…
Pioneer's Shimano Dura Ace 9000 Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. The Dura Ace 9000 left crank arm meter allows every rider power-based (also called watt-based) training performance, allowing you to fine-tune your pedaling to find race-winning…
Power to the people! Add the Pioneer Power meter to your existing Shimano crank. Pioneer's crankset-based power meters are simply some of the best power-monitoring systems on the planet, and the Upgrade Kit gives you the chance to add it to your existing crankset. At the heart of the Pioneer Power…
- 104 BCD spider is compatible with all TRS+ and TRSr cranks - TRS+ single spider is not drilled for a granny ring - TRS+ double spider has holes for 64 BCD granny ring - Spiders require TRS lockring and removal tool (sold separately)
Designed for enduro and trail riding, the AMg V2 Alloy chain guide features an upper guide for chain security and an integrated skid to protect the chainring and frame. - Compatible with 1x9, 1x10, and 1x11 drivetrains - Integrated nylon skid glides over rocks - Softer co-molded upper for quiet…
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or…
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
Replacement crank bolt and puller cap set for Race Face Cinch cranksets.
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage…
- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation…
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
Spindle kit for Race Face CINCH cranks.
- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications
- Service parts for E-13 chainguides
- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets