Other

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Forged aluminum construction - Locking - Fits threadless fork steer tubes

- For MTB levers - 7mm x 1mm - Aluminum construction

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Routes cables underneath the bottom bracket - Will not rust or corrode

• Aluminum • CNC-finished

• Aluminum clamp • Built-in rear rack mount

- Chrome allen seat binder bolt

- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm

Sunlite's Single Speed Chain Guide lets you turn most geared bikes into single speeds. It mounts to your derailleur hanger and takes up the chain slack for smooth, quite and chain-drop-free riding. It's made of aluminum and steel for excellent performance and durability. And it also allows adjusting the chain line to perfection for the smoothest-running drivetrain.

- Fits Shimano and ISIS BBs - Single key release - Shell: 15mm SHI/ISIS axle bolt one-key release - Sold in pairs

• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm

Sunlite braze-on front derailleur adapter

- Rubber - Color: Black

- Standard steel replacement

These lightweight alloy bar end plugs provide a clean look and allow the use of bar ends on your Specialized carbon bar. - 100% CNC machined, 4-piece alloy design. - Dual side-loaded cylinder design ensures even pressure across full width of plug and bar end clamp. - Aluminum "lip" protects carbon bars from impacts. - Beautiful and clean machined design enhances handlebar looks. - Expansion range: 18.5mm to 20.0mm - Weight: 22g/pair - NOTE: Specialized bar end plugs are required for Specialized carbon bars.

Gel Pads maximize comfort with any drop bar and tape, by absorbing vibration and impact shock.

QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack

Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

Shimano's Dura-Ace Di2 takes shifting to the next level. The Rear Wiring Kit connects to both the left and right shifters and Junction Box A (which displays battery power and allows manual adjusting). It also includes a battery mount, cable covers to route and hide the cables and a wire plug/unplug tool. The External Kit is meant to be run on the outside of the frame.

This is a replacement hardware kit for Dura-Ace FD-R9100 Front Derailleurs. It includes support bolt and plates.

Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.